Philips Hue Driver for Control4

Hue lights that behave like Control4 lights.

Trial download opens at launch

14 days with everything working. No account and no key needed to try it.

A room's Hue scenes, on the room's own light.

Point a light at a Hue room and that room's scenes from the Hue app appear on its screen in Control4. Choose one and the bridge recalls it for the whole room. Try it.

A demonstration on this page, not a recording of Control4. In a project the scenes come from your own Hue app and are listed on the room light's screen.

What it does.

Local. Nothing in between.

The driver talks to the Hue bridge directly, over your own network, using Hue's current local interface. No cloud account and no third-party service in the project.

Changes made in the Hue app or on a Hue dimmer show up in Control4 as they happen, because the bridge tells the driver about them.

Lights, rooms and zones.

Every Hue bulb can be a Control4 light: on, off, dimming and ramping. A whole Hue room or zone can be one light too, switched with a single command so the room moves together.

One action imports every light and room that is not already in the project, names each after its Hue name and puts it in the matching Control4 room.

Colour and white.

The driver reads what each bulb can do and gives Control4 the matching controls: full colour, white temperature across the bulb's own range, both, or neither. Colours set in the Hue app show in Control4.

Motion sensors.

Hue motion sensors become Control4 motion sensors, with temperature, light level and battery available for programming. A hold time keeps motion active for as long as your lighting automation needs.

The details.

Included
Four drivers: Hue Bridge, Hue Light, Hue Motion and Hue Scene. One licence covers all four in one project.
Control4
OS 3.3.0 or later. Installed with Composer Pro.
Hue
Hue Bridge or Hue Bridge Pro, on the same network as the controller.
Lights
On, off, dim, ramp to level, colour, colour temperature. Rooms and zones as single lights.
Scenes
A room's Hue scenes listed on that room's light. The room needs at least one colour or white-temperature bulb. Any scene can also be recalled from programming.
Sensors
Motion, temperature, light level, battery.
Connection
Local network only. Live updates from the bridge, with polling as a fallback.
Licence
One per project, bought once. Tied to the controller running Director. Checked over the internet when first activated; keeps working offline after that.

USD 250

Once, per project. Try it free for 14 days first; the trial is the full driver.

  1. Download and add it

    Add the bridge driver to your project in Composer Pro and pair it with the Hue bridge. The trial starts by itself.

  2. Buy when you are ready

    Payment is by card through Stripe. Your licence key is shown as soon as the payment goes through.

  3. Enter the key

    Type it into the bridge driver's Licence Key property. That project is licensed from then on.

Questions.

What happens when the trial ends?

The driver stays connected and keeps showing the state of your lights, but stops sending commands, and the lights show as offline in Control4. Enter a licence key and it carries on. Nothing in the project needs to be redone.

Does it need the internet?

Only to start the trial and to activate a licence. Control of the lights never leaves your network, and a licensed project keeps working with no internet connection.

My project has several controllers. Do I need a licence for each?

No. You need one licence per project. It is tied to the controller running Director, the primary controller; the other controllers in the project need nothing. A separate project, such as a second home, needs its own licence and gets its own trial.

What if the controller running Director is replaced?

Get in touch and we will release the key so it can be used on the new one.

Is this made by Philips or Control4?

No. It is written and sold by TNT Custom Design & Installation, an independent Control4 integrator. It works with Philips Hue bridges and Control4 controllers.

Setting it up? The install guide has every step. Looking for something else? See all drivers.